New 2025 Chevrolet LCF 5500XG Crew Cab Stake Bed
Stock #251350
Vehicle Notes
16'6 VERSA-LINE WOOD PLATFORM W/ TIE RAIL - 16'L X 96W WOOD FLOOR W/ STEEL UNDERSTRUCTURE & TAPERED CORNERS - 6 X 10 GA. STEEL SIDES & END RAI…
Read More…
Read More…
Chassis Details
Stock Number
251350
Stock Type
New
Year
2025
Make
Chevrolet
Model
LCF 5500XG
Class
5
GVWR
19,500
Drivetrain
RWD
Cab Type
Crew
Vehicle Trim
NA
Vehicle VIN
54DEEJ1D1SSR04716
Interior Color
Medium Ash Gray, Cloth seat trim
Seating Capacity
7
Exterior Color Description
Arc White
Engine Cylinder Count
8
Transmission Type
Automatic
Fuel Type
Gasoline
Engine Model
L8T
Engine Size (L)
6.6
Horsepower
350
Brake Type
Hydraulic
Vehicle Options
- GVWR, 19,500 lbs. (8845 kg)
- Door locks, power
- Brakes, 4-wheel antilock, front and rear disc
- Audio system feature, 2 speakers
- Rear suspension, 14,550 lbs. (6600 kg), multi-leaf, semi-elliptical steel alloy. Includes shock absorbers
- Tires, front, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season
- Vehicle Application Truck
- Seat, front high back bucket driver and passenger tricot cloth covered reclining high back driver seat with single two-occupant fold down passenger seat (STD)
- Lighting, interior dome
- Windshield washer bottle access on passenger side dash when passenger-side door is open
- Rear axle, 5.37 ratio
- Wheelbase, 176" (447.0 cm)
- Air conditioning, single-zone manual, integral in-dash mounted
- Emissions, 50 state certification
- Incomplete vehicle certification
- Steering column, Tilt-Wheel
- Windshield wiper, pulse, wet arm
- Steering wheel, urethane
- Drivetrain, rear-wheel drive
- Floor mats
- Grille, Silver
- Windows, power
- Tires, rear, 225/70R19.5 G, LRR (low rolling resistance) tubeless steel belted radial, all-season
- Exhaust, single outlet
- Frame, ladder-type channel frame. Full C section straight frame 33.5" (85.1 cm) wide. Yield strength 44,000 psi, section modulus 7.20 cu.in. and RBM 316,800 lb-ft/in per rail.
- Brake, parking, cable actuated, internal expanding drum type, transmission-mounted
- Cup holders
- Daytime Running Lamps
- Cruise control, electronic, automatic
- Battery, 750 cold-cranking amps, 12-volt single, maintenance free, frame-mounted battery box
- LED Headlamps
- Front axle, 7275 lbs. (3300 kg), reverse Elliot "I"-beam
- Assist steps
- Fuel tank, 38.6 Gallon, (146L), rectangular fuel tank mounted between frame rail with electric type fuel pump (mounted in tank). Through the rail fuel fill.
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead valve water cooled 6.6L SIDI V8 350 hp [261 kW] @ 4500 rpm, 425 lb.-ft of torque [575.8 N-m] @ 3800 rpm. Electronically controlled direct fuel injection. Six bolt main cap design for heavy-duty performance. Engine Control Module (ECM) and Transmission Control Module (TCM) engine control system. Engine cruise control, engine oil cooler, High Idle Mode (1200 rpm). (STD)
- Seat trim, Cloth
- Wheels, 19.5" x 6", steel (STD)
- Storage, door pockets
- Storage, seatback pockets
- Transmission, Allison 1000 RDS 6-speed automatic. PTO not available. (STD)
- Driver Information Center
- Glass, tinted
- Pre-Delivery Inspection
- Transmission, Allison 1000 RDS 6-speed automatic. PTO not available.
- Medium Ash Gray, Cloth seat trim
- Wheels, 19.5" x 6", steel
- PIO, Mirror, outside left-hand and right-hand with integral convex mirrors, heated, dual remote controls
- PIO, Forward Collision Alert and Lane Departure Warning (Mobileye)
- Arc White
- Preferred Equipment Group
- PIO, Audio System, Enhanced audio system
- PIO, Rear Vision Camera
- Engine, 6.6L V8 SIDI, GMPT-V8 8 cylinder V Iron block, four cycle overhead
- PIO, Back-up alarm
- PIO, Fire extinguisher and safety triangle, includes storage/mounting provisions
- Seat, front high back bucket driver and passenger
- PIO, Remote Keyless Entry
- 50-STATE EMISSION
- 38.6 GALLON FUEL TANK
- View All
Body Details
Manufacturer
Body Type
Stake Bed
Body Model
16' Versa-Line - Stake Bed
Body Material
Steel
Body Length
16'
Body Width
96"
Has Bulkhead
Yes
Floor Material
Wood
Lighting Description
Rubber Mounted Lights to FMVSS Specifications
Lighting Location
Exterior
Mud Flaps Description
Rear Rubber Flaps with Anti-Sail Brackets
Rub Rail Description
6” x 10 Gauge Steel Side & End Rails
Side Description
Steel Stake Racks with Swing Out Rear Gate
Side Height
50"
Camera Description
Factory Backup Camera
Understructure Description
Steel Understructure
Understructure Material
Steel
Versa-Line Stake Body Features
• 30” to 40” stake sides
• Stake pockets will accept 2” x 4” lumber
• Slats are made of ribbed steel for strength & durability (Optional wood slats are available.)
• Swing gate & hold down latch are standard
• Latch assembly secures corners and sides for less noise & more cargo protection
• Floors feature CCA treated water repellent 2” tongue and groove floor boards (Optional smooth or treadplate steel is available.)
• 5” x 10 gauge steel side & end rails
• 3” structural channel crossmembers on 12” centers
• Structural channel longsills (6” to 8”) are gussetted to every crossmember for strength
• Front & rear crossmembers give added floor strength
• Body is hoist compatible
• Standard sizes available from 7’ x 78” to 24’ x 96” (Others upon request)
| Call For Pricing |
Pricing Details
Vehicle available NOW in Strongsville, OH.
Contact Serpentini Chevrolet for more info.
(440) 870-8175Similar Vehicles
-
-
New 2024 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2024 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2025 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2025 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2025 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2024 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2025 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2025 Chevrolet LCF 5500XG Regular Cab Stake Bed
-
New 2025 Chevrolet LCF 5500XG Regular Cab Stake Bed